Dmx driver with the RDM function, NFC function, read and write DMX512 address or adjust output voltage by mobile Easy NFC app. or special NFC device, offered in a variety of wattages in both 12V and 24V DC models to Wired4signs strip lights.
Brand:
HIDEAItem no.:
SMT-12300-5C-ADimming Mode:
DMX DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
300WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
277x78x25MMWeight:
1000gCertification:
UL/CULWarranty:
7 Years
Dmx driver with dimming capability can dim the LED
light output over the full range from 100% to 0%, Our
new RGB dimmable LED drivers are designed to operate
with Mtccanadaledlights RGB strips.
Specification
| Model | SMT-12300-XC-A | SMT-24300-XC-A | |
| X=1 , 2, 3, 4, 5 for DIM (DW); CCT(TW); RGB; RGBW; RGBW+CCT (RGBCW) | |||
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Rated current | CH1+CH2+CH3+CH4+CH5=25A | CH1+CH2+CH3+CH4+CH5=12.5A | |
| Rated power | 300W | ||
| Load Regulation | ±1% | ||
| Input | Voltage Range | 110-277VAC | |
| Frequency Range | 47-63Hz | ||
| PowerFactor(Typ.)@full load | PF≥0.98@230VAC | ||
| THD(Typ.)@full load | ≤10% | ||
| Efficiency(Typ.)@full load | 91.5%@230VAC | 93%@230VAC | |
| AC Current(Max.) | 3.5A | 3.5A | |
| Inrush Current (Typ.) | 48.5A (Twidth 164us measured at 50% I peak, COLD START, 230VAC) | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | Hiccup mode ,recovers automatically after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode ,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~95%RH, non-condensing | ||
| Storage TEMP.Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 UL1310 (US) | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (EU) & I/P-O/P:1.5KVAC(US) | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 ,3-3 (EU) & FCC Part 15 B (US) (≥60% loading) | ||
| EMC Immunity | EN61000-4-2,3,4,5,6,11, EN61547 | ||
| Others | Net Weight | 1KG | |
| Dimension | 277x78x25mm (LxWxH) | ||
| packing | 10PCS/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Compatible Light Type
AspectLED's flexible colorful LED strip lights feature super bright side emitting SMD 335 LEDs and are a perfect solution for a wide variety cove lighting, under-cabinet lighting, back-lighting, pathway lighting and decorative lighting together with dmx driver.
Related Products
Mode：SMT-012-300VWN2J
Dimming Mode : Non-Dimming
Output Power : 300W
intput voltage：100-277VAC
Size：303*78*47MM （L*W*H）
Class 2 12v 300w led driver with 5x 60W power outputs, suitable for powering a wide range of LED strip and linear lighting products.
※Input terminal with 3P; Live Wire(L) , Neutral Wire (N) . Note: vacant for middle terminal
※Output terminals with 6P; LED SEC positive (LED+), LED negative (LED-). Connected to LED light; Common anode design
2P for DIM (DW) dimming;
※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!
■ DMX512 address setting Operation
※The default address for the DMX driver is 001.
※Address settings device:
※Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
■ Adjust output voltage Operation
※Adjust output voltage slightly for DMX512 driver
1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely.
■ See figure below
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW)
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
