Brand:
HIDEAItem no.:
SMT-12300V-DP2Dimming Mode:
DALI DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
300WOutput Voltage:
12/24/36/48VdcShape & Size:
Standard SizeSize:
301*78*25.1mmWeight:
1.15KGCertification:
UL、cULWarranty:
7 years warranty
UL Certification dali 2 & push dt6 dimmable 12 volt transformers waterproof ip67
The high power 300W LED driver is packaged in an aluminum case with short circuit, overload and overtemperature protection, and can be cooled by free air convection. In accordance with dali dimming protocol IEC62386, suitable for large-scale intelligent led lighting installation projects
Specification
| Model | SMT-12300V-DP2 | SMT-24300V-DP2 | SMT-36300V-DP2 | SMT-48300V-DP2 | |
| Output | DC Voltage | 12V (12-13V adjust by NFC) | 24V (24-25.5V adjust by NFC) | 36V (36-38V adjust by NFC) | 48V (48-50V adjust by NFC) |
| Voltage Tolerance | ±0.2V | ||||
| Rated current | 25A | 12.5A | 8.34A | 6.25A | |
| Rated power | 300W | ||||
| Load Regulation | ±2% | ||||
| Input | Standby power consumption | ≤0.5W | ≤0.5W | ≤0.6W | ≤0.6W |
| Voltage Range | 110-277VAC | ||||
| Frequency Range | 47 - 63Hz | ||||
| Power Factor(Typ.)@ full load | PF≥0.98@120VAC PF≥0.95@230VAC PF≥0.90@277VAC (Full loading) | ||||
| THD(Typ.)@ full load | ≤10%@120VAC ; ≤10%@230VAC; ≤15%@277VAC | ||||
| Efficiency(Typ.)@ full load | 88%@120VAC; | 89%@120VAC; 91%@230VAC; 91%@277VAC | |||
| AC Current(Max.) | 3.5A | 3.5A | 3.5A | 3.5A | |
| Inrush Current (Typ.) | 60A,9us@50%Ipeak(120VAC);70A,188us@50%Ipeak(230VAC) 180A,4.4us@50%Ipeak (277VAC) | ||||
| Leakage current | <0.5mA | ||||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |||
| Over Load | ≤120% ,hiccup mode, recover automatically after fault condition is removed | ||||
| Over temperature | Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops. | ||||
| Environment | Working TEMP. | -40~+70℃ (see below derating curve) | |||
| Working Humidity | 20 - 95%RH,non-condensing | ||||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||||
| Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 (US) | |||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC (EU); I/P-O/P:1.88KVAC (US) | ||||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||||
| EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 (EU)≥50% Load & FCC Part 15 B (US) | ||||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11, EN61547 | ||||
| Others | Weight | 1.15KG | |||
| Dimension | 301*78*25.1mm (L*W*H) | ||||
| packing | 390*325*185mm/20PCS/CTN G.W.:24KG/CTN | ||||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC/230VAC input , rated load and 25℃of ambient temperature. | ||||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||||
Related Products
7 year warranty 300W High power led driver Aluminum case, waterproof ip67, safe and reliable
Mode：SMT-012-300VTD
Dimming Mode : 5 in 1 dimming
Output Power : 300W
input voltage：100-277Vac
Size：276*78*47mm（ L*W*H）
■ Mechanical Specification
Input & Output wiring
※Input Rubber cable 3*1.0mm², the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
※Output rubber cable 2*1.5mm² x2 groups for 12VDC model, Red is output ( V+) Positive, Black is output (V-) negative.
※Output rubber cable 2*1.5mm² one group for 24VDC, 36VDC, 48VDC models, Red is output ( V+) Positive, Black is output (V-) negative . Connected to LED Lamps
Dimming wiring
※Dimming Rubber cable 2*1.0mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .
Blue (N) is connected to AC (N) while white (L) is connected to Push dim switch dimmer( L) when use Push function..
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!
■ Dimming Operation
Tags :
277vac dali-2 & push dimmable led driver 30W has built-in active PFC function PF>0.99, constant voltage working mode, efficiency up to 85%, dimming range between 0-100%, suitable for intelligent led lighting
60W DALI-2 & PUSH dimmable led driver, built-in active PFC function, PF>0.99, constant voltage mode, work efficiency can reach 85%, metal shell design, integrated power supply and terminal box, easy to install
The 100W LED driver adopts dali-2 dimming protocol. The dimming range starts from 0-100% to 0.1% constant voltage mode, and the efficiency is as high as 90%
277vac 120W Dali-2 dimmable led power supply operates in constant voltage mode with efficiency up to 90%. Metal case design with dimming range of 0-100% enables flicker-free dimming
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
