Brand:
HIDEAItem no.:
SMT-012-100VTSPHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
100WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
330*30*22mmWeight:
0.4KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warranty
slim size triac dimmable 12v constant voltage dimmable led strip light driver 100w 24v transformer
Ultra thin size 100W plastic case triac dimming led driver, compatible with most triac dimmers on the market to achieve flicker free dimming, built-in PFC function PF>0.96, power efficiency >86%
Specification
| model | SMT-012-100VTSPH | SMT-024-096VTSPH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Accuracy | ±5% | ±5% | |
| Rated current | 8.33Amp | 4Amp | |
| Rated power | 100W | 96W | |
| Voltage Regulation | ±0.5% | ||
| THD(Typ. ) @ full load | <10% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≥0.96/230VAC | ||
| Full Load Efficiency(Typ.) | >86% | >88% | |
| AC Current(Typ.) | 0.61A/200VAC | 0.59A/200VAC | |
| Inrush Current(Typ.) | 52A, 50% 210us@230VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
| Protection Class | II | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Weight | 0.4Kg | |
| Size | 330*30*22mm(L*W*H) | ||
| packing | 50pcs /CTN SIZE: 350X330X145mm | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Related Products
7-year warranty 100W 5 in 1 led driver aluminum shell surrounded by the body, waterproof grade IP67, can effectively waterproof and dustproof, protect the lamp normal use
Mode：SMT-012-100VTD
Dimming Mode : 5 in 1 dimming
Output Power :100W
intput voltage：100-277Vac
Size：230*70*43mm L*W*H）
Mechanical Specification
Ø Input terminals: (L)and (N) to connect to L and N of Mains AC
Ø Output terminals: "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Suggested wire diameter : Input 0.75--2.5m㎡;Output 0.5-2.5m㎡
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
■Connecting Diagram
Tags :
SAA certified 100W led driver triac dimming input voltages range from 200 to 240vacBuilt-in PFC function, constant voltage mode, efficiency >86%
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
