Brand:
HIDEAItem no.:
SMT-012-060VTSPHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
60WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
300*30*18.5mmWeight:
0.3KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warranty
SAA ultra slim triac dimmable led power supply led driver 60w 12v/24v plastic shell
hidea power slim size Series triac dimming led driver has strong compatibility, with 30W, 36W, 60W, 100W for users to choose, can achieve flicker free dimming,
Specification
| model | SMT-012-060VTSPH | SMT-024-060VTSPH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 5.0Amp | 2.5Amp | |
| Rated power | 60W | 60W | |
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 220-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | 0.98@220VAC | ||
| Full Load Efficiency(Typ.) | >84% | >85% | |
| AC Current(Typ.) | 0.37A/220VAC | ||
| Inrush Current(Typ.) | 50A,50%,136us@230VAC | ||
| THD(Typ. )@ full load | <20% | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
| Protection Class | II | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) and UL8750 (US) | |
| Withstand voltage | I/P-O/P:3.75KVAC (EU) and I/P-O/P:1.88KVAC (US) | ||
| Isolation resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance to EN55015, EN61000-3-2 (≥60%load) (EU) and FCC Part 15 (US) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry | ||
| Others | Weight | 0.25Kg | |
| Size | 300*30*18.5mm (L*W*H) | ||
| packing | 330*330*130mm/50PCS/CTN G.W.:13.60KG/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Related Products
The 60W triac dimming led driver is UL-certified with 100-277vac input voltage and integrated junction box and power supply. It is easy to install and suitable for large commercial and super lighting projects
Mode：SMT-012-060VTHW
Dimming Mode : triac dimming
Output Power :60W
intput voltage：100-277Vac
Size：188*92*26mm L*W*H）
Mechanical Specification
Ø Input terminals: (L)and (N) to connect to L and N of Mains AC
Ø Output terminals: "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Suggested wire diameter : Input 0.75--2.5m㎡;Output 0.5-2.5m㎡
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
■Connecting Diagram
Tags :
SAA certified 100W led driver triac dimming input voltages range from 200 to 240vacBuilt-in PFC function, constant voltage mode, efficiency >86%
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
