SAA certified 100W led driver triac dimming input voltages range from 200 to 240vacBuilt-in PFC function, constant voltage mode, efficiency >86%
Brand:
HIDEAItem no.:
SMT-012-100VTSWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
100WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
330*32*23mmWeight:
0.6KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warranty
SAA triac dimmable waterproof electronic led power supply 100w ip67 led strip light driver
hidea power 100W silm size triac dimming led driver with good waterproof grade IP67, can effectively water and dust, in line with the global safety lighting regulations, SAA certification is suitable for the use and installation of lighting projects in Australia
Specification
| model | SMT-012-100VTSPH | SMT-024-096VTSPH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Accuracy | ±5% | ±5% | |
| Rated current | 8.33Amp | 4Amp | |
| Rated power | 100W | 96W | |
| Voltage Regulation | ±0.5% | ||
| THD(Typ. ) @ full load | <10% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≥0.96/230VAC | ||
| Full Load Efficiency(Typ.) | >86% | >88% | |
| AC Current(Typ.) | 0.61A/200VAC | 0.59A/200VAC | |
| Inrush Current(Typ.) | 52A, 50% 210us@230VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
| Protection Class | II | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Weight | 0.4Kg | |
| Size | 330*30*22mm(L*W*H) | ||
| packing | 50pcs /CTN SIZE: 350X330X145mm | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Related Products
The triac dimmable 100W LED driver 277vac is UL certified and a hot seller for hidea power, waterproof ip67, good performance and comes with a 7-year warranty
Mode：SMT-012-100VTHW
Dimming Mode : triac dimming
Output Power : 100W
intput voltage：100-277Vac
Size：230*70*46MM L*W*H）
Mechanical Specification
Ø Input terminals: (L)and (N) to connect to L and N of Mains AC
Ø Output terminals: "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Suggested wire diameter : Input 0.75--2.5m㎡;Output 0.5-2.5m㎡
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
■Connecting Diagram
Tags :
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
