Brand:
HIDEAItem no.:
SMT-012-080VTHWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
80WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
230*70*43mmWeight:
1.1kgCertification:
SAA CEWarranty:
7 Years
IP67 24VDC triac dimming led driver power Supply 12V Transformer Waterproof
Hidea Power Triac Dimming 80W Led Driver Waterproof IP67, which can effectively waterproof and dustproof, have 7 years of warranty, protect the lamps for a longer period of time
Specification
| model | SMT-012-080VTHWH | SMT-024-080VTHWH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 6.67A | 3.33A | |
| Rated power | 80W | ||
| Input | Voltage Range | 200-240V AC | |
| Frequency Range | 47-63HZ | ||
| Power Factor | PF≧0.97/200VAC PF≧0.97/230VAC PF≧0.97/240VAC(Full loading | ||
| Full Load Efficiency(Typ.) | 82% | 83% | |
| AC Current (Max.) | 0.8A | 0.8A | |
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over load | ≤120% constant current limiting, auto-recovery | ||
| Over Temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+60℃ (Refer to Derating Curve -- Page 4) | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~40℃) | ||
| Vibration | 10 - 500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes. | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015,EN61000-3-2,3 (≥60%loading) | ||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11,EN61547 | ||
| Others | Weight | 1.1kg | |
| Size | 230*70*43mm(L*W*H) | ||
| packing | 245*75*65mm inner box, 340*275*170mm outside carton 10PCS /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and | ||
| 25℃of ambient temperature. | |||
| 2. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
Related Products
Triac Dimming 80W led driver input voltage 170-265VAC passed ETL certification, waterproof IP67
Mode：SMT-012-080VT
Dimming Mode : triac-Dimming
Output Power : 80W
intput voltage：170-265Vac
Size：230*70*43MM （L*W*H）
Input Rubber cable H05RN-F 3*1.0mm² ,the green /yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
Output Rubber cable H05RN-F 2*1.0mm²,Red is output(V+) Positive,Black is output (V-) negative.Connected to LED Lamps.
Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
Compatible with Leading edge and tailing edge triac dimmers.
Please use a dimmer with max. power at least 1.5 times than the load.
Tags :
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
