Brand:
HIDEAItem no.:
SMT-012-036VTSPHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
36WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
260*30*18.5mmWeight:
0.3KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warranty240vac 30w 12v triac dimming led driver constant voltage power supply transformer 24v
The hidea power Ultra Thin triac dimming 36W led power supply is suitable for indoor installation in narrow Spaces, easy to hide the body, free air convective cooling, with short circuit/over voltage/over heat protection, 7 year warranty
Specification
model | SMT-012-036VTSPH | SMT-024-036VTSPH | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Accuracy | ±5% | ±5% | |
Rated current | 3.0Amp | 1.5Amp | |
Rated power | 36W | 36W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±0.5% | ||
Input | Voltage Range | 220-240VAC | |
Frequency Range | 47~63HZ | ||
Power Factor ( Typ.) | PF≥0.96/230VAC | ||
THD(Typ. ) @ full load | <20% | ||
Full Load Efficiency(Typ.) | >80% | >80% | |
AC Current(Typ.) | 0.23A/220VAC | ||
Inrush Current(Typ.) | 34A,50%,104us@230VAC | ||
Leakage current | <0.5mA | ||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
Protection Class | II | ||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
Environment | Working TEMP. | -40~+60℃ | |
Working Humidity | 20~90%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
Isolation resistance | I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
Others | Weight | 0.2Kg | |
Size | 260*30*18.5mm(L*W*H) | ||
packing | 50pcs /CTN SIZE: 330X275X130mm | ||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Related Products
36W 0-10V dimming led driver plastic housing IP20 ETL certification complies with international lighting safety code
Mode:SMT-012-036VD
Dimming Mode : triac dimming
Output Power : 36W
intput voltage:100-265Vac
Size:180*60*34mm L*W*H)
■ Mechanical Specification
Ø Input terminals: (L)and (N) to connect to L and N of Mains AC
Ø Output terminals: "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Suggested wire diameter : Input 0.75--2.5m㎡;Output 0.5-2.5m㎡
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
■Connecting Diagram
Tags :