Brand:
HIDEAItem no.:
SMT-012-384VTHJDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
384WOutput Voltage:
12/24VdcShape & Size:
J-BOX DriverSize:
323*140*47.5mmWeight:
2.7KGCertification:
UL、cULWarranty:
7 years warranty
high power 384W 12 volt constant voltage triac dimmable power supply for led strip lights
384W high power led driver with 100-277vac input voltage has built-in PFC function, PF>0.99, with short circuit, overload, overtemperature protection design, integrated power supply and junction box, easy to install, suitable for commercial super lighting projects
Specification
| Model | SMT-024-384VTHJV2 | SMT-048-384VTHJV2 | |
| Output | DC Voltage | 24V | 48V |
| Voltage Tolerance | 4*4A | ||
| Voltage Regulation | 384W (4*96W) | ||
| Load Regulation | ±0.5V | ||
| Rated current | ±0.5% | ||
| Rated power | ±1% | ||
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor(Typ.)@ full load | 0.99@120VAC 0.95@277VAC | 0.99@120VAC 0.95@277VAC | |
| THD(Typ.)@ full load | <20% | <20% | |
| Efficiency(Typ.)@ full load | 89%@120VAC 90%@277VAC | 89%@120VAC 90%@277VAC | |
| AC Current(Max.) | 3.7A@100VAC | 3.7A@100VAC | |
| Inrush Current (Typ.) | 35A (twidth=960us) @120VAC ; 43A (twidth=1ms) @277VAC 12.4A (twidth=430us) @277VAC | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode ,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| Others | Net. Weight | 2.7Kg | |
| Size | 323*140*47.5mm (L*W*H) | ||
| packing | 10pcs /CTN | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
Related Products
MLV ELV 12v 300W triac dimming led driver The MLV ELV 12V 300W Triac Dimming LED driver has passed the UL certification and can be used in North American supermarkets and home lighting projects
Mode：SMT-012-300VTHV2
Dimming Mode : triac dimming
Output Power : 300W
input voltage：100-277Vac
Size：256*78*47MM L*W*H）
※ Input wire 18AWG Black and White to be connected to AC L and N ,Green wire is ground wire and goes ground.
※Output wire16AWG Red to LED Positive side (+) while Black to LED Negative side (-).; Four groups output cables for Four groups output cables for SMT-024-384VTHJV2 and SMT-048-384VTHJV2
※Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
※The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase/triac dimmer.
※Usually matching with Forward phase , leading edge , Magnetic low voltage, triac dimmers, or Reverse phase, trailing edge ,Electric low voltage Dimmers.
※Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Tags :
Constant voltage operating mode, efficiency up to 83%
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
