Brand:
HIDEAItem no.:
SMT-012-300VTHWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
300WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
276*78*47mmWeight:
1.7kgCertification:
SAA CEWarranty:
7 Years
high power 300w 24v led strip light triac dimmable driver transformer
300W triac dimmable led driver，Work efficiency> 89% of the whole body aluminum shell is surrounded by the whole body, convenient and fast installation, Hidea Power provides 7 -year warranty for it
Specification
| Model | SMT-012-300VTHWH | SMT-024-300VTHWH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 25A | 12.5A | |
| Rated power | 300W | ||
| Input | Voltage Range | 200-240V AC | |
| Frequency Range | 47-63HZ | ||
| Power Factor | PF≧0.97/200VAC PF≧0.97/230VAC PF≧0.97/240VAC(Full loading) | ||
| Full Load Efficiency(Typ.) | 88% | 89% | |
| AC Current (Max.) | 2.0A | 2.0A | |
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over load | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over Temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+60℃ (Refer to Derating Curve -- Page 4) | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~40℃) | ||
| Vibration | 10 - 500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes. | ||
| Safety standards | EN61347-1 EN61347-2-13 | ||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| Safety&EMC | EMC EMISSION | EN55015,EN61000-3-2,3 (≥60%loading) | |
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11,EN61547 | ||
| Others | Weight | 1.67kg | |
| Size | 276*78*47mm(L*W*H) | ||
| packing | 336*121*61mm inner box, 350*310*260mm outside carton 10PCS /CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
| 3. Loading range from 10% to 100% | |||
Related Products
300W High Power led driver waterproof and constant pressure without noise can be well compatible with most of the light regulator on the market
Mode：SMT-012-300VTD
Dimming Mode :5 in 1-Dimming
Output Power :300W
intput voltage：100-277Vac
Size：276*78*47mm （L*W*H）
Input Rubber cable H05RN-F 3*1.0mm² ,the green /yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
Output Rubber cable H05RN-F 2*1.0mm²,Red is output(V+) Positive,Black is output (V-) negative.Connected to LED Lamps.
Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
Compatible with Leading edge and tailing edge triac dimmers.
Please use a dimmer with max. power at least 1.5 times than the load.
Tags :
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
