Brand:
HIDEAItem no.:
SMT-012-060VTDSPHDimming Mode:
5 in 1 DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
60WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
300*32*20mmWeight:
0.3KGCertification:
CE,RoHSWarranty:
7 years warranty
hidea power slim size 12v 60 watt rgb triac dimmable led strip driver 12v power supply
hidea power 60W dimming led driver with built-in PFC function, constant voltage mode, efficiency up to 83%, with short circuit, overload, overheating protection
Specification
| model | SMT-012-060VTDSPH | SMT-024-060VTDSPH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Tolerance | ±0.5 | ||
| Rated current | 5.0Amp | 2.5Amp | |
| Rated power | 60W | 60W | |
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47 - 63Hz | ||
| Power Factor ( Typ.) | PF≥0.96/230VAC | ||
| THD(Typ. ) @ full load | <20% | ||
| Full Load Efficiency | 83% | 86% | |
| AC Current(Typ.) | 0.5A | ||
| Inrush Current(Typ.) | 57.6A,50%,128us | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ | ||
| II | |||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 - 95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P : 100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Weight | 0.3Kg | |
| Size | 300*30*18.5mm(L*W*H) | ||
| packing | 330*330*130mm/ 50pcs /CTN G.W.: 16KG/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Related Products
Waterproof constant voltage 60W 0-10v LED driver ETL certification, in line with the global lighting safety laws, 5-year warranty, safe and reliable
Mode：SMT-012-060VD
Dimming Mode : 0-10v dimming
Output Power : 60W
intput voltage：100-265Vac
Size：200*68*45mm L*W*H）
■ Mechanical Specification
Ø Input terminals: (L) and (N) to connect to L and N of Mains AC
Ø Output terminals: LED (+) to LED Positive side (+) , LED (-) to LED Negative side (-).
Ø Dimming Terminal: DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) to 0/1-10V dimmer signal(-)
Ø Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Connecting Diagram
v TRIAC/Phase cut dimming
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
Ø Matching with leading edge and trailing edge Triac dimmer or lighting system.
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Tags :
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
