Brand:
HIDEAItem no.:
SMT-012-020VDDimming Mode:
0-10V DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-265VacOutput Power(Watt):
20WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
140*45*27mmWeight:
160gCertification:
ETLWarranty:
5 Years
ETL CE 0 10v dimming led driver 12v 24v 20w
0 10v dimming driver 12v 20w is constant voltage type power supply, without PWM output, 5 years warranty, work well with LUTRON 0-10v dimmers.
Specification
| Model | SMT-012-020VD | SMT-024-020VD | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0~1.66A | 0~0.83A | |
| Rated power | 20W | 20W | |
| Input | Voltage Range | 100~130VAC / 170~265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.90/110V, PF≧0.90/220V | ||
| Full Load Efficiency(Typ.) | >88%/110V | >88% 220V | |
| AC Current(Typ.) | 0.23A/110V | 0.11A/220V | |
| Leakage current | ﹤0.7mA/110V, 220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦280VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | ||
| Others | Weight | 0.16Kg | |
| Size | 140*45*27mm(L*W*H) | ||
| packing | 320*280*215mm/50pcs /CTN 145*50*36mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V,220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
Compatible Light Type
ETL listed led driver 24v 20w indoor plastic IP20 type. widely use in luminare led lighting., work with DELLUM LED IP65 (Waterproof) NEON UL 3014(120) LED Strip White.
Related Products
Mode：SMT-012-030VDSP
Dimming Mode : 0-10V Dimming
Output Power : 30W
intput voltage：100~277V AC
Size：260*30*18.5MM （L*W*H）
12v 30w slimline type 0-10v dimmable led driver, ip20 plastic type, 7 years warranty.
Tags :
This 12v 30w led power supply is 0-10v dimmable constant voltage led driver,compatible with LEVITON PWM dimmers, 5% minimum load.
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
