Brand:
HIDEAItem no.:
SMT-012-100VMSWHDimming Mode:
DALI DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
100WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
300*32*23MMWeight:
530gCertification:
CEWarranty:
7 YearsDALI waterproof led power supply dimming led driver ip67 12v 100w
Constant voltage dimming led driver 100w are avalible in 12vdc and 24vdc, 100-277vac wide range input voltage, compatible with MEANWELL DALI driver 12v.
Label
Specification
model | SMT-012-100VMSWH | SMT-024-096VMSWH | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Tolerance | ±0.5V | ±0.5V | |
Rated current | 8.33Amp | 4.0Amp | |
Rated power | 100W | 96W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±2% | ||
Input | Voltage Range | 100-277VAC | |
Frequency Range | 47~63HZ | ||
Power Factor(Typ.)@ full load | 0.98@120VAC | 0.98@120VAC | |
Efficiency(Typ.)@fullload(Typ.) | >88% | >88% | |
AC Current(Max.) | 1.2A@100VAC | ||
THD(Typ. ) @ full load | 10%@120VAC | 10%@120VAC | |
Inrush Current(Typ.) | 4.1A (twidth=220us) @120VAC ; 35.2A (twidth=164us) @230VAC ;12.8A (twidth=960us) @277VAC ; | ||
Leakage current | <0.5mA | ||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition removed | |
Over Load | ≤120% Hiccup mode ,recovers automatically after fault condition is removed or shut down o/p voltage, re-power on to recover after fault condition removed | ||
Protection Class | I | ||
Over temperature | 100℃±10℃ shut down o/p voltage,automatically recover after cooling | ||
Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
Working Humidity | 20~95%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz,5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) and UL8750 (US) | |
Withstand voltage | I/P-O/P:3.75KVAC (EU) and I/P-O/P:1.88KVAC (US) | ||
Isolation resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | ||
EMC EMISSION | Compliance to EN55015, EN61000-3-2 (≥60%load) (EU) and FCC Part 15 (US) | ||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry | ||
Others | Net Weight | 0.53Kg | |
Size | 330*32*23mm(L*W*H) | ||
packing | 360*270*175mm/30PCS/CTN G.W.:16.9KG/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Compatible Light Type
Dimmable led driver constant voltage DALI power supply are widely used in LED lighting applications, high efficency 88% and PFC 0.95, work well with ONE LIGHT led strips light.
Related Products
Mode:SMT-012-100VTSP
Dimming Mode : Triac Dimming
Output Power :100W
intput voltage:100~277V AC
Size:330*30*22MM (L*W*H)
slim led driver 12v 100w IP20 type , triac dimming led power supply with 100-277vac input, UL listed.