Brand:
HIDEAItem no.:
SMT-012-100VTDSWHDimming Mode:
5 in 1 DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
100WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
330*32*23mmWeight:
0.4KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warrantyConstant voltage triac&0-10v dimmable waterproof led power supply driver ip67 100w led transformer
Constant voltage 5 in 1 dimming led driver waterproof grade ip67 aluminum shell design, suitable for retail, advertising light box and other lighting projects, in line with the global safe lighting law, 7 years warranty
Specification
model | SMT-012-100VTDSWH | SMT-024-100VTDSWH | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Tolerance | ±0.5 | ||
Rated current | 8.33Amp | 4.16Amp | |
Rated power | 100W | 100W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±2% | ||
±1% | |||
Input | Voltage Range | 200-240VAC | |
Frequency Range | 47 - 63Hz | ||
Power Factor(Typ.)@ full load | PF≥0.99/230VAC | ||
THD(Typ. ) @ full load | < 10% | ||
Efficiency(Typ.)@ full load | 85% | 87% | |
AC Current(Max.) | 0.8A | 0.8A | |
Inrush Current (Typ.) | 72A,50%,116us | ||
Leakage current | <0.5mA | ||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
Over Load | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
Over temperature | 100℃±10℃ | ||
Protection Class | I | ||
Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
Working Humidity | 20 - 95%RH,non-condensing | ||
Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 IP67 | |
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
Isolation resistance | I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH | ||
EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 | ||
EMC Immunity | EN61000-4-2,3,4,5,6,11 EN61547 | ||
Others | Net Weight | 0.55Kg | |
Dimension | 330*32*23mm(L*W*H) | ||
packing | 360*270*175mm/ 30pcs /CTN G.W.: 17.5KG/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Related Products
triac dimming 100W led driver operating mode is constant voltage,It can provide smooth and stable protection
Mode:SMT-012-100VT
Dimming Mode : triac dimming
Output Power : 100W
intput voltage:170-265Vac
Size:230*68*45MM L*W*H)
■ Mechanical Specification
Ø Input cable 3*1.0mm²,the green/yellow cable to (FG), "Brown" to L ,and "Blue" to N of Mains AC
Ø Output cable 2*1.0 mm²: "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Dimming cable 2*0.75 mm²: DIM (+) Blue to 0/1-10V dimmer signal(+ ),DIM (-) white to 0/1-10V dimmer signal (-)
Ø Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Connecting Diagram
※ TRIAC/Phase cut dimming:
Ø The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
Ø Matching with leading edge and trailing edge Triac dimmer or lighting system.
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Tags :