Brand:
HIDEAItem no.:
SMT-012-060VTSWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
60WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
300*32*20mmWeight:
0.45KGCertification:
SAA,C-Tick, CE,RoHSWarranty:
7 years warranty
ce 240vac 60w waterproof 12v/ 24V dc electronic triac dimming led driver
60W triac dimmable led power has built-in PFC function, constant voltage operation mode, efficiency >84%, short circuit, over temperature, overload protection meets global lighting safety regulations, we also provide a 7 year warranty
Specification
| model | SMT-012-060VTSWH | SMT-024-060VTSWH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 5.0Amp | 2.5Amp | |
| Rated power | 60W | 60W | |
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≥0.96/230VAC | ||
| Full Load Efficiency(Typ.) | >84% | >85% | |
| AC Current(Typ.) | 0.37A/200VAC | 0.37A/200VAC | |
| Inrush Current(Typ.) | 50A,50%,136us@230VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
| Protection Class | I | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Weight | 0.45Kg | |
| Size | 300*32*20mm(L*W*H) | ||
| packing | 30pcs /CTN SIZE: 330X270X160mm | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Related Products
The 30W TRIAC dimming led driver is UL certified with input voltages of 100-277vac and waterproof grade IP67 in an aluminum case
Mode：SMT-012-030VTSW
Dimming Mode : triac dimming
Output Power : 30W
intput voltage：100-277VAC
Size：263*32*20MM L*W*H）
■ Mechanical Specification
Ø Input : Cable H05RN-F 3*1.0mm² Brawn(L)and Blue(N) to connect to L and N of Mains AC;the green /yellow cable connect with (FG),
Ø Output : Cable H05RN-F 2*1.0mm² "Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
Ø Compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better..
Ø Please try to use dimmers with power at least 1.5 times as the output power of the driver.
■Connecting Diagram
Tags :
SAA certified 100W led driver triac dimming input voltages range from 200 to 240vacBuilt-in PFC function, constant voltage mode, efficiency >86%
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
