Brand:
HIDEAItem no.:
SMT-12030-1C-PDimming Mode:
DMX DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
30WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
171.5*54*20MMWeight:
350gCertification:
UL/CULWarranty:
7 Years
30w 12v dmx driver rgb led transformer
30W Dimming led driver DMX dimmable is read and write DMX512 address or adjust output voltage by mobile Easy NFC APP or special NFC device, compatible with LTECH DMX dimmable driver 12v.
Specification
| Model | SMT-12030-XC-P | SMT-24030-XC-P | |
| X=1 for DIM (DW); | |||
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Rated current | CH1=2.5A | CH1=1.25A | |
| Rated power | 30W (class 2 power units) | ||
| Load Regulation | ±2% | ||
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47 - 63Hz | ||
| Power Factor(Typ.)@ full load | PF≥0.95/ 230VAC (Full loading) | ||
| THD(Typ.)@ full load | ≤10%@120VAC ≤20%@230VAC ≤20%@277VAC | ||
| Efficiency(Typ.)@full load | 80% @230VAC | 82%@230VAC | |
| AC Current(Max.) | 0.4A | 0.4A | |
| Inrush Current (Typ.) | 7A, 50%, 350us @120VAC; 25A, 50% , 200us @277VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | |
| Over Load | ≤120% ,hiccup model, recover automatically after fault condition is removed | ||
| Over temperature | ≤100℃±10℃, shutdown output voltage, recover automatically after temperature drop | ||
| Protection Class | II | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 - 90%RH ,non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 UL1310 (US) | |
| Withstand voltage | I/P-O/P:3.75KVAC (EU) & I/P-O/P:1.5KVAC (US) | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 (EU) & FCC Part 15 B (US) | ||
| EMC Immunity | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Net Weight | 0.35KG | |
| Dimension | 171.5*54*20mm (L*W*H) | ||
| packing | / | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Compatible Light Type
30W dimmable constant voltage driver in DMX dimming are DMX512; DMX512 signal isolation, work well with Philips Hue Ledstrip white and colored light.
Related Products
Mode：SMT-012-030VD
Dimming Mode : 0-10V Dimming
Output Power : 30W
input voltage：100-265VAC
Size：140*45*28MM （L*W*H）
12v 30w 0-10V PWM dimming led driver , plastic case IP20 rated, 5 years warranty.
※Input terminal with 3P; Live Wire(L) , Neutral Wire (N) . Note: vacant for middle terminal
※Output terminals with 6P; LED SEC positive (LED+), LED negative (LED-). Connected to LED light; Common anode design
2P for DIM (DW) dimming;
※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!
■ DMX512 address setting Operation
※The default address for the DMX driver is 001.
※Address settings device:
※Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
■ Adjust output voltage Operation
※Adjust output voltage slightly for DMX512 driver
1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely.
■ See figure below
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW)
Tags :
Dmx driver with the RDM function, NFC function, read and write DMX512 address or adjust output voltage by mobile Easy NFC app. or special NFC device, offered in a variety of wattages in both 12V and 24V DC models to Wired4signs strip lights.
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
