Brand:
HIDEAItem no.:
SMT-012-030VTHWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
30WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
155*54*20MMWeight:
210gCertification:
SAA CEWarranty:
7 Years
30W 12v/24v constant voltage triac dimmable LED driver transformer
240VAC traic dimmable 30W LED driver has passed SAA and CE certification, which is in line with European and Australian lighting rules. Can be well compatible with the lamps to achieve the flashless smoothing light
Specification
| model | SMT-012-030VTHWH | SMT-024-030VTHWH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 2.5A | 1.25A | |
| Rated power | 30W | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor | PF≧0.97/200VAC PF≧0.97/230VAC PF≧0.97/240VAC(Full loading) | ||
| Full Load Efficiency(Typ.) | 79% | 79% | |
| AC Current (Max.) | 0.22A | 0.22A | |
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≦120% shut down o/p voltage, re-power on to recover | ||
| Over Current | ≦ 1.2 *Iout | ||
| Over Temperature | 100℃± 10℃ shut down o/p voltage ,re-power on to recover | ||
| Environment | Working TEMP. | -40-+70℃ | |
| Working Humidity | 20-90%RH, non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10-95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0-50℃) | ||
| Vibration | 10-500Hz,2G 10min./1 cycle,period for 72min,each along X,Y,Z axes. | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧60%loading) | ||
| Others | Net.Weight | 0.21KG | |
| Size | 155*54*20mm (L*W*H) | ||
| packing | 160*60*23mm for inner box ; 350*240*130mm for carton 40PCS/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. | ||
| 2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again | |||
| 4. Loading range from 10% to 100% | |||
Compatible Light Type
The size is only 155*54*20mm plastic shell triac dimmable 30W LED driver 12v, which can be removed at both ends. The installation is convenient to be exposed to the outer wire. It is safe and reliable. It has 7 years of warranty.
Related Products
277Vac 30W triac dimmable led driver integrates the power supply with the wiring box, and the installation is convenient and fast
Mode：SMT-012-030VTH
Dimming Mode : triac-Dimming
Output Power : 30W
intput voltage：100~277V AC
Size：165*92*26MM （L*W*H）
Ø Input (L) and (N) with wire to be connected with AC
Ø Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
Ø Suggested wire diameter:Input 0.75-2.5m㎡; Output:0.5-2.5m㎡.
Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a Triac dimmer/light system.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.
Ø please try to use dimmers with power at least 3 times as the output power of the driver.
Tags :
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
