Brand:
HIDEAItem no.:
SMT-012-300VWJ2V2Dimming Mode:
Non-dimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
300WOutput Voltage:
12/24VdcShape & Size:
J-BOX DriverSize:
301*130*46mmWeight:
2.2KGCertification:
UL、cULWarranty:
7 years warranty
300w class 2 non dimmable led driver power supply for outdoor led lighting
Class 2 high power led 300W driver built-in PFC function PF>0.99, body integrated power and junction box, can effectively protect the power supply, easy to install, with a seven-year warranty
Specification
| Model |
SMT-012-300VWJ2 (1.0 version) SMT-012-300VWJ2V2 (2.0 version) SMT-012-300VWJ2WV2 (3.0 version) |
SMT-024-288VWJ2 (1.0 version) SMT-024-288VWJ2V2 (2.0 version) SMT-024-288VWJ2WV2 (3.0 version) |
|
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±1% | ±1% | |
| Rated current | 25A (multi current 5*5A) | 12A(multi current 3*4A) | |
| Rated power | 300W (5*60W) | 288W (3*96W) | |
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor (Typ.)@full load | 0.99@120VAC 0.95@277VAC | 0.99@120VAC 0.95@277VAC | |
| THD(Typ.)@full load | <20% | <20% | |
| Inrush Current(Typ.) | 88%@120V 92%@277VAC | 86%@120V 91%@277VAC | |
| Efficiency(Typ.)@Full Load | 3.4A@100VAC | 3.6A@100VAC | |
| AC Current(Typ.) | 35A ,50%,960us @120VAC ; 43A,50%,1ms @277VAC;12.4A (twidth=430us) @277VAC | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode ,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
| Others | Weight | 2.2Kg (1.0 version) | |
| Size | 1.0 version: 301*108*46mm / 2.0 version: 301*130*46mm ;3.0 version: 301*140*45mm | ||
| packaging | 330*220*245mm 8pcs /CTN G.W.:21.08KG/CTN (1.0 version) 385*335*200mm 20PCS/CTN | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
Related Products
■ Mechanical Specification
Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Class 2 standard output terminal. Five groups of cables for SMT-012-300VWJ2, SMT-012-300VWJ2V2, SMT-012-300VWJ2WV2 ; Three groups for SMT-024-288VWJ2,SMT-024-288VWJ2V2,SMT-024-288VWJ2WV2
■ Dimming Operation
Tags :
The led driver 200w operates in universal input voltage (100-277VAC) and come in 12VDC 24VDC voltage output. Compatible with Meanwell LED driver, this driver offers junction box for higher safe prodcution and installation.
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
