Brand:
HIDEAItem no.:
SMT-24096V-DP2-2CDimming Mode:
DALI DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
96WOutput Voltage:
12/24/36/48VdcShape & Size:
Standard SizeSize:
231*78*25.1mmWeight:
0.83KGCertification:
UL、cULWarranty:
7 years warranty
12/24 volt class 2 DALI 2 &PUSH dimmable ip67 waterproof 96W led lighting driver power supply
This 96W constant-voltage led driver has built-in NFC function. Users can link with the product through the mobile phone, set the address code and fine-tune the output voltage, dali2&push dimmable mode, dimming range from 0 to 100%, with a 7 year warranty
Specification
| Model | SMT-24096V-DP2-2C | SMT-36096V-DP2-2C | SMT-48096-DP2-2C | |
| Output | DC Voltage | 24V(24-26V adjust by NFC) | 36V(36-38V adjust by NFC) | 48V(48-50V adjust by NFC) |
| Voltage Tolerance | ±0.2V | |||
| Rated current | 4A | 2.67A | 2.0A | |
| Rated power | 96W | |||
| Load Regulation | 1% | |||
| Voltage Range | 100-277VAC | |||
| Frequency Range | 47 - 63Hz | |||
| Power Factor(Typ.)@ full load | PF≥0.98@120VAC PF≥0.96@230VAC PF≥0.95@277VAC (Full loading) | |||
| THD(Typ.)@ full load | ≤10%@120VAC ; ≤10%@230VAC; ≤15%@277VAC | |||
| Efficiency(Typ.)@ full load | 86%@120VAC 89%@230VAC/277VAC | |||
| AC Current(Max.) | 1.3A | |||
| Standby power consumption | 0.25W(@120V) | 0.20W(@120V) | 0.20W(@120V) | |
| 0.42W(@230V) | 0.43W(@230V) | 0.43W(@230V) | ||
| 0.47W(@277V) | 0.48W(@277V) | 0.48W(@277V) | ||
| Inrush Current (Typ.) | 23.2A, 50%, 360us @120VAC; 80A, 50% , 104us @230VAC,54A, 50% , 280us @277VAC | |||
| Leakage current | <0.5mA | |||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed | ||
| Over Load | ≤120% ,hiccup mode, recover automatically after fault condition is removed | |||
| Over temperature | Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops. | |||
| Environ-ment | Working TEMP. | -40 ~ +70℃ (see below derating curve) | ||
| Working Humidity | 20 ~ 95%RH,non-condensing | |||
| Storage TEM.,Humidity | -40 ~ +80℃,10 ~ 95%RH | |||
| TEMP.coefficient | ±0.03%/℃(0 ~ 50℃) | |||
| Vibration | 10 ~ 500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | |||
| Safety & EMC | Safety standards | EN61347-1 EN61347-2-13(EU) & UL8750(US) | ||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC (EU)I/P-O/P:1.80KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC (US) | |||
| Isolation resistance | I/P-O/P:100MΩ/ 500VDC/ 25℃/ 70%RH | |||
| EMC Emission | EN55015 EN61000-3-2 EN61000-3-3 (EU)≥50% Load & FCC Part 15 B (US) | |||
| EMC Immunity | EN61000-4-2,3,4,5,6,11 EN61547 | |||
| Others | Weight | / | ||
| Dimension | 232*78*25.1mm (L*W*H) | |||
| packing | / | |||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | |||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | ||||
Related Products
96w dali dimming led power supply Aluminum case waterproof rating ip67, ETL certified, with a five-year warranty
Mode：SMT-012-096VM
Dimming Mode : dali dimming
Output Power : 96W
input voltage：100-265Vac
Size：230*69*45mm （ L*W*H）
■ Mechanical Specification
Input & Output wiring
※Input Rubber cable 3*1.0mm² , the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
※Output rubber cable 2*1.0mm², Red is output ( V+) Positive, Black is output (V-) negative. Connected to LED Lamps
Dimming wiring
※Dimming Rubber cable 2*1.0mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .
Blue (N) is connected to AC (N) while white (L) is connected to Push dim switch dimmer( L) when use Push function..
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!
■ Dimming Operation
Tags :
CCT & 5 in 1(Triac 0-10V 1-10V Registor 10V PWM) Dimmable
Dual channel (2 colors)
CCT warm dimming
100-277Vac
200W
12/24/36/48Vdc
UL
7th Floor No. 3 Building No. 928 Nanhuan Road Changtai Str. Wuxing Area licheng Dist. Quanzhou, Fujian, China
IPv6 network supported 
