Brand:
HIDEAItem no.:
SMT-12200-5C-ADimming Mode:
DMX DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
200WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
277x78x25MMWeight:
1000gCertification:
UL/CULWarranty:
7 Years
12 volt led DMX dimmable transformer
200-Watt universal dimming LED lighting driver
provides the utmost in performance, reliability,
economy and versatility, compatible with the
Armacost low-voltage 12-volt RGB LED lighting.
Specification
| Model | SMT-12200-XC-A | SMT-24200-XC-A | |
| X=1 , 2, 3, 4, 5 for DIM (DW); CCT(TW); RGB; RGBW; RGBW+CCT (RGBCW) | |||
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Rated current | CH1+CH2+CH3+CH4+CH5=16.66A | CH1+CH2+CH3+CH4+CH5=8.33A | |
| Rated power | 200W | ||
| Load Regulation | ±1% | ||
| Input | Voltage Range | 110-277VAC | |
| Frequency Range | 47-63Hz | ||
| PowerFactor(Typ.)@ full load | PF≥0.98@230VAC | ||
| THD(Typ.)@full load | ≤10% | ||
| Efficiency(Typ.)@full load | 91.5%@230VAC | 93%@230VAC | |
| AC Current(Max.) | 2.5A | 2.5A | |
| InrushCurrent(Typ.) | 48.5A (Twidth 164us measured at 50% I peak, COLD START, 230VAC) | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | Hiccup mode ,recovers automatically after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~95%RH, non-condensing | ||
| StorageTEMP.Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) & UL8750 UL1310 (US) | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (EU) & I/P-O/P:1.5KVAC(US) | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 ,3-3 (EU) & FCC Part 15 B (US) (≥60% loading) | ||
| EMC Immunity | EN61000-4-2,3,4,5,6,11, EN61547 | ||
| Others | Net Weight | 0.75KG | |
| Dimension | 277x78x25mm (LxWxH) | ||
| packing | 10PCS/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
Compatible Light Type
Marc LED 12VDC LED strip light or tape light comes with an easy to connect 20 AWG wire and premium 3M Sticky Tape for easy and quick installation, connecting LED strips with a comtable
12 volt led DMX dimmable transformer is a necessary process in projects.
Related Products
Mode：SMT-012-200VTHW
Dimming Mode : Triac Dimming
Output Power : 200W
intput voltage：100-277VAC
Size：256*78*47MM （L*W*H）
Phase cut dimmable 200w led power supply can be used with any phase control dimmers (Forward Phase (Triac/MLV) and Reverse Phase (ELV).
※Input terminal with 3P; Live Wire(L) , Neutral Wire (N) . Note: vacant for middle terminal
※Output terminals with 6P; LED SEC positive (LED+), LED negative (LED-). Connected to LED light; Common anode design
2P for DIM (DW) dimming;
※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.
Note: there is external antenna at output side. Don't disassemble!
■ DMX512 address setting Operation
※The default address for the DMX driver is 001.
※Address settings device:
※Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
■ Adjust output voltage Operation
※Adjust output voltage slightly for DMX512 driver
1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely.
■ See figure below
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW)
Dmx driver with the RDM function, NFC function, read and write DMX512 address or adjust output voltage by mobile Easy NFC app. or special NFC device, offered in a variety of wattages in both 12V and 24V DC models to Wired4signs strip lights.
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
