Brand:
HIDEAItem no.:
SMT-012-060VTHWHDimming Mode:
Triac DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
200-240VacOutput Power(Watt):
60WOutput Voltage:
12/24VdcShape & Size:
Standard SizeSize:
178*61*24mmWeight:
375gCertification:
SAA CEWarranty:
7 Years
12v dc triac dimmable 24v 60w constant voltage dimmable led driver
60W triac dimmable led driver work efficiency with short -circuit, overloading, and over temperature can reach 85%, suitable for indoor LED lighting projects
Specification
| model | SMT-012-060VTHWH | SMT-024-060VTHWH | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 5A | 2.5A | |
| Rated power | 60W | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor | PF≧0.98/200VAC PF≧0.98/230VAC PF≧0.98/240VAC(Full loading) | ||
| Full Load Efficiency(Typ.) | 85% | 85% | |
| AC Current (Max.) | 0.38A | 0.38A | |
| Leakage current | <0.50mA | ||
| protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≦120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over Current | ≦ 1.2 *Iout | ||
| Over Temperature | 100℃± 10℃ shut down o/p voltage ,re-power on to recover | ||
| Environment | Working TEMP. | -40-+70℃ | |
| Working Humidity | 20-90%RH, non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10-95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0-50℃) | ||
| Vibration | 10-500Hz,2G 10min./1 cycle,period for 72min,each along X,Y,Z axes. | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧60%loading) | ||
| Others | Net.Weight | 0.35KG | |
| Size | 178*61*24mm (L*W*H) | ||
| packing | 185*65*28mm inner box 290*215*240mm outside carton 20PCS/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. | ||
| 2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again | |||
| 4. Loading range from 10% to 100% | |||
Compatible Light Type
60W 12V Triac Dimmable LED driver IP20 Design for Indoor Installation Being able to be well compatible with TRIAC DIMMER to light without flashing
Related Products
Slim Size 60W TRIAC DIMMABLE LED DRIVER Plastic Shell is suitable for indoor installation
Mode：SMT-012-060VTSP
Dimming Mode : triac-Dimming
Output Power : 60W
intput voltage：100~277V AC
Size：300*30*18.5MM （L*W*H）
Ø Input (L) and (N) with wire to be connected with AC
Ø Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
Ø Suggested wire diameter:Input 0.75-2.5m㎡; Output:0.5-2.5m㎡.
Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a Triac dimmer/light system.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.
Ø please try to use dimmers with power at least 3 times as the output power of the driver.
Tags :
NO.178 Chang Xin Road, Huoju Industrial Zone Jiangnan Downtown Licheng Quanzhou, Fujian, 362000 China
IPv6 network supported 
