Brand:
HIDEAItem no.:
SMT-012-060VMSPDimming Mode:
DALI DimmingWorking Mode:
Constnat Voltage LED DriverInput Voltage:
100-277VacOutput Power(Watt):
60WOutput Voltage:
12/24VdcShape & Size:
Slim SizeSize:
300*30*18.5MMWeight:
250gCertification:
CEWarranty:
7 Years12 volt 60w rgb dali 2 dimming led light strip led driver power supply manufacturer
The dali 2 constant voltage dimmable led driver 60W with 100-277vac input voltage and built-in PFC capability is up to 88% efficient, plastic case, waterproof rating ip20, and comes with a 7-year warranty
Label
Specification
model | SMT-012-060VMSP | SMT-024-060VMSP | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Tolerance | ±0.5V | ±0.5V | |
Rated current | 5.0Amp | 2.5Amp | |
Rated power | 60W | 60W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±2% | ||
Input | Voltage Range | 100-277VAC | |
Frequency Range | 47~63HZ | ||
Power Factor(Typ.)@ full load | 0.98@120VAC | 0.98@120VAC | |
Efficiency(Typ.)@ full load(Typ.) | >86% | >88% | |
AC Current(Max.) | 0.73A@100VAC | ||
THD(Typ. ) @ full load | 10%@120VAC | 10%@120VAC | |
Inrush Current(Typ.) | 3A (twidth=220us) @120VAC ; 34A (twidth=121us) @230VAC ;12.4A (twidth=680us) @277VAC ; | ||
Leakage current | <0.5mA | ||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition removed | |
Over Load | ≤120% Hiccup mode ,recovers automatically after fault condition is removed orshut down o/p voltage, re-power on to recover after fault condition removed | ||
Protection Class | II | ||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling | ||
Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
Working Humidity | 20~95%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 (EU) and UL8750 (US) | |
Withstand voltage | I/P-O/P:3.75KVAC (EU) and I/P-O/P:1.88KVAC (US) | ||
Isolation resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | ||
EMC EMISSION | Compliance to EN55015, EN61000-3-2 (≥60%load) (EU) and FCC Part 15 (US) | ||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry | ||
Others | Net Weight | 0.25Kg | |
Dimension | 300*30*18.5mm(L*W*H) | ||
packing | 330*330*130mm/50PCS/CTN G.W.:13.6KG/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Related Products
triac & 0-1v dimmable led driver power supply 12v/24v waterproof grade ip20 Plastic case for easy installation
Mode:SMT-012-060VTDSP
Dimming Mode : 5 in 1 Dimming
Output Power : 60W
intput voltage:100~277V AC
Size:300*32*20MM (L*W*H)
Tags :